All Items

• Flush cutting edge
• 2.0mm/12 AWG copper cutting capacity
• Length: 125mm/4.9in

• Full bypass shear cutter
• Provides precision wire cutting and trimming
• Preserves wire symmetry
• Spring loaded

• For 8-10 Mil insulation thickness, including Kynar, Tefzel, Teflon
• For cable from .012" to .22" diameter
• V-notch jaw automatically positions and holds cable, increasing cutting accuracy
• Wire guide roller maintains stripping head alignment, producing a square, clean cut
• Fixed blades are sized to insulation, and stainless steel construction assures long life
• K-6493 blade, with .152mm (.0060") cutting depth

• 2 Temperature settings: Low 450°F (230°C) and High 680°F (360°C)
• Small size makes it easy to get into hard-to-reach places
• Unique angled design offering three operating positions (palm, pencil and hands free)
• Retractable stand for hands free operation
• 120VAC

• Includes reflector nozzle for more effective heat shrinking
• 2 Temperature settings: Low 662°F (350°C) and High 932°F (500°C)
• Small size makes it easy to get into hard-to-reach places
• Foldable stand
• 120VAC

• GT 150
• GT 280
• 150 Metri-Pack
• 280 Metri-Pack
• 280 Tangless & 280 Bus Bar
• 630 Pull-To-Seat
• 800 Metri-Pack Female

• 56 Series
• 280 Metri-Pack
• 480 Metri-Pack
• 630 Metri-Pack
• 800 Metri-Pack Male Tangless

Delphi P/N: 12014012-1

Delphi P/N: 12031876-1

• Flat, serrated jaws
• Mini-bevel cutting edge
• 1.0mm/18 AWG copper cutting capacity
• Length: 120mm/4.7in

• Half-round, serrated jaws
• Mini-bevel cutting edge
• 1.0mm/18 AWG copper cutting capacity
• Length: 135mm/5.3in

• Half-round, serrated jaws
• Length: 135mm/5.3in

• Flat, serrated jaws
• Length: 138mm/5.4in

• Half-round, smooth jaws
• Length: 150mm/5.9in

• Lowest profile vise base on the market
• Self-centering, extra-wide opening jaws open a full 9" (228.6mm)
• Ribbed, neoprene jaw pads are 1.875" (47.6mm) high x 1.5" (38.1mm) wide and provide a sure grip
• Reverse the pads and the wide "V" holds cylindrical objects
• Parts tray base mount adds stability with an 8.5" (215.9 mm) diameter

• 3" jaw opening
• Horizontal and vertical grooves on jaws for holding a variety of different parts
• Reinforced thermal composite plastic jaws with continuous heat tolerance to 350°F (177°C), intermittent heat up to 450°F (204°C)
• Lowest profile vise base on the market
• Adjustment points on vise base and head for maximum maneuverability

• Light weight, ergonomic design
• Simple operation, ease-of-use
• Simple adjustment features to accommodate varying terminal heights, depths and carrier strip lengths
• Adjustable tool accommodates side-feed front-carrier terminal strips of varying sizes. Tool is not designed to cut end-feed, center-carrier or dual-carrier terminal strips

• Tool to separate terminals from terminal-reel, coil up to a material thickness of 1/32"
• The Cut Off Tool enables operators to easily cut side-feed, front-carrier terminal strips and reels
• Produces a clean cut of multiple terminals at once – for more efficiency
• Versatile tool, works with most standard metal strip reels

• Convenient pocket-size booklet includes 10 markers of each legend
• Plastic, cloth construction for long-lasting durability
• Resist abrasion, moisture, dirt and oil
• Perforated 1/4 in. x 1-1/2 in. markers can be separated into half-length sizes
• Non-smear black legend
• Self-sticking on wire and cable
• Temperature Range: -40°F to 180°F (-40°C to 82°C)

• Low cost wire stripper with ground knife-type notches for light-duty stripping
• Plier nose
• Cutting edge cuts copper up to 16 AWG
• Self opening spring design with safety lock
• Length: 165mm/6.5in

• For automotive wire types, and MIL-W-22759/16 and /17 (Not for use on aircraft)
• Precision-ground, knife-type blades provide clean, accurate stripping
• One-step stripping enhances productivity
• Length: 180mm/7.1in

• For Mil-Spec wire types: M22759/16/17, /32/33/34/35, /41/42/43/44/45/46, M81044/11/12/13
• For Spec 44: 44A011X, 44M9976
• For Spec 55: 55A011X, 55D011X, 55A021X, 55D021X, 55A081X, 55PC011X, 55PC021X
• Precision counter-bored die blades provide clean, accurate stripping, without contacting the conductor
• Grit type gripper pad
• One-step stripping enhances productivity
• Length: 180mm/7.1in

• For Mil-Spec wire types: M22759/16/17, /32/33/34/35, /41/42/43/44/45/46, M81044/11/12/13
• For Spec 44: 44A011X, 44M9976
• For Spec 55: 55A011X, 55D011X, 55A021X, 55D021X, 55A081X, 55PC011X, 55PC021X
• The Lite model is 3/4 the size of a Custom Stripmaster
• Requires one-third less hand pressure, and weighs 50% less than its full sized counterparts
• Precision counter-bored die blades provide clean, accurate stripping, without contacting the conductor
• Grit type gripper pad
• One-step stripping enhances productivity
• Length: 140mm/5.5in

• For Mil-Spec wire types: M22759/16/17, /32/33/34/35, /41/42/43/44/45/46, M81044/11/12/13
• For Spec 44: 44A011X
• For Spec 55: 55A011X, 55D011X, 55A021X, 55D021X, 55A081X, 55PC011X, 55PC021X
• Ergonomic design offers superior comfort, balance and control
• Constructed of rigid polymer reinforced with carbon fiber for excellent strength at 40% the weight of metal hand tools
• Tilted head assembly maintains a neutral wrist posture allowing an unobstructed view of wire positioning
• Comfort grip handles improve leverage and reduce pressure point distress
• Advanced blade design acts as a wire guide system, resulting in consistent quality strips
• Grit type gripper pad
• One-step stripping enhances productivity
• Length: 165mm/6.5in

• Applicable for fine, flexible and solid cables
• Stripping Capacity: 0.08 - 16 mm² (28 - 6 AWG)
• Semi-circular grooved holding clamp for better grip that holds practically any insulation material securely in place.
• For special requirements, such as particularly hard or soft insulation materials, optimum fine adjustments can be made using the adjustment wheel.
• Adjustable length stop for precision work. Up to 18mm (11/16")
• Built-in wire cutter