Used for splash resistant shield termination, and coaxial cable termination of wires rated for at least +85°C.
Preinstalled 22 AWG ground lead 6" long.
Temperature Rating: -55°C to +125°C

		Cable OD
	Raychem P/N	Jacket OD Max.	Shield OD Min.
CWT-3-W122-5	537543-000	2.7mm (0.105 in)	1.5mm (0.059 in)
CWT-5-W122-5	152435-000	4.5mm (0.180 in)	2.0mm (0.079 in)
CWT-6-W122-5	416947-000	6.0mm (0.235 in)	3.3mm (0.130 in)
CWT-7-W122-5	764619-000	7.0mm (0.275 in)	3.3mm (0.130 in)

For "One-step" termination of a wire to the lead of a electrical component or terminal of a connector.
Temperature Rating: -55°C to +125°C

			Wire and Pin Range
	Raychem P/N	Max. Pin Dia.	Min. Dia.	Max. Dia.
CWT-1501	667353-000	0.6mm (0.025 in)	0.9mm (0.035 in)	1.5mm (0.060 in)
CWT-1502	549865-000	0.9mm (0.035 in)	1.1mm (0.045 in)	2.3mm (0.090 in)
CWT-1503	281949-000	1.2mm (0.045 in)	1.6mm (0.065 in)	2.8mm (0.110 in)
CWT-1504	514649-000	1.5mm (0.060 in)	1.8mm (0.070 in)	3.8mm (0.150 in)

For crimped, environmentally sealed, wire to wire splicing.
Protects splices from fuel, oil, water, salt, and corrosion.
Temperature Rating: -55°C to +125°C

	Raychem P/N	Color	Wire Size
DURA-1	D-406-0001, 967398-000	Red	0.5-1.0mm2 (22-18 AWG)
DURA-2	D-406-0002, 454100-000	Blue	1.5-2.5mm2 (16-14 AWG)
DURA-3	D-406-0003, 108961-000	Yellow	3.0-6.0mm2 (12-10 AWG)

A high performance 2:1 shrink ratio, flame retardant, chemical and abrasion resistant tubing. The first choice in protecting high performance wiring harnesses.
Spec: MIL-DTL-23053/16
Operating Temperature: -75°C to +150°C
Min. Shrink Temperature: 150°C

Size (In.)	Expanded I.D. mm (In.)	Recovered I.D. mm (In.)	Nom. Recovered Wall Thickness mm (In.)	Full spool amount
1/8	3.2 (.125)	1.6 (.062)	0.76 (.030)	150 ft
3/16	4.8 (.187)	2.4 (.093)	0.84 (.033)	150 ft
1/4	6.4 (.250)	3.2 (.125)	0.89 (.035)	150 ft
3/8	9.5 (.375)	4.8 (.187)	1.02 (.040)	150 ft
1/2	12.7 (.500)	6.4 (.250)	1.22 (.048)	150 ft
3/4	19.0 (.748)	9.5 (.375)	1.45 (.057)	100 ft
1	25.4 (1.00)	12.7 (.500)	1.78 (.070)	100 ft
1 1/2	38.0 (1.50)	19.0 (.748)	2.41 (.095)	100 ft

NOTE: At present 1/8" and some 3/16" stock have Raychem branding and size printed in a dot-matrix style.
Our stock of 3/16 (some) 1/4, 3/8, 1/2 (some), and 3/4" are in the old stamped ink style.
While there is no PCN for this change, our stock indicates this change was implemented on/around 6/2020, and was predominantly the dot matrix style up until the end of 2023, where we're now seeing more sizes in the stamped ink style again as of 2024.

DR-25-TW flexible fluid resistant elastomeric tubing, developed from DR-25, is a thin wall version ideal for use where space and weight saving are important.
A high performance 2:1 shrink ratio, flame retardant, chemical and abrasion resistant tubing. Ideally suited for the demands of motorsport cable harnesses.
Spec: VG95343 Part 5 Type D
Operating Temperature: -75°C to +150°C
Min. Shrink Temperature: 125°C

Size (In.)	Expanded I.D. mm (In.)	Recovered I.D. mm (In.)	Nom. Recovered Wall Thickness mm (In.)	Full spool amount
3/32	3.2 (.125)	1.6 (.062)	0.51 (.020)	150m (492 ft)
1/8	3.2 (.125)	1.6 (.062)	0.51 (.020)	150m (492 ft)
3/16	4.8 (.187)	2.4 (.093)	0.51 (.020)	150m (492 ft)
1/4	6.4 (.250)	3.2 (.125)	0.64 (.025)	75m (246 ft)
3/8	9.5 (.375)	4.8 (.187)	0.64 (.025)	75m (246 ft)
1/2	12.7 (.500)	6.4 (.250)	0.64 (.025)	75m (246 ft)
3/4	19.0 (.748)	9.5 (.375)	0.76 (.030)	75m (246 ft)
1	25.4 (1.00)	12.7 (.500)	0.89 (.035)	30m (98 ft)
1 1/2	38.0 (1.50)	19.0 (.748)	1.02 (.040)	30m (98 ft)

A high performance 2:1 shrink ratio, flame retardant, chemical and abrasion resistant tubing. The first choice in protecting high performance wiring harnesses.
Spec: MIL-DTL-23053/16
Operating Temperature: -75°C to +150°C
Min. Shrink Temperature: 150°C

Size (In.)	Expanded I.D. mm (In.)	Recovered I.D. mm (In.)	Nom. Recovered Wall Thickness mm (In.)	Full spool amount
1/8	3.2 (.125)	1.6 (.062)	0.76 (.030)	100m (328 ft)
3/16	4.8 (.187)	2.9 (.114)	0.84 (.033)	100m (328 ft)
1/4	6.4 (.250)	3.2 (.125)	0.89 (.035)	100m (328 ft)
3/8	9.5 (.375)	4.8 (.187)	1.02 (.040)	100m (328 ft)
1/2	12.7 (.500)	6.4 (.250)	1.22 (.048)	60m (196 ft)
3/4	19.0 (.748)	9.5 (.375)	1.45 (.057)	60m (196 ft)
1	25.4 (1.00)	12.7 (.500)	1.78 (.070)	30m (98 ft)
1 1/2	38.0 (1.50)	19.0 (.748)	2.41 (.095)	15m (49 ft)

NOTE: At present all sizes have Raychem branding and size printed in a white dot-matrix.

A very clear, thin-wall, flexible 2:1 shrink ratio tubing. Used to protect wire and cable labels, and other items to protect them from mechanical and chemical abuse while permitting full inspect-ability of the item covered.
Spec: MIL-DTL-23053/18
Operating Temperature: -50°C to +150°C
Min. Shrink Temperature: 150°C

Size (In.)	Expanded I.D. mm (In.)	Recovered I.D. mm (In.)	Nom. Recovered Wall Thickness mm (In.)
1/16	1.6 (.063)	0.79 (.031)	0.25 (.010)
1/8	3.2 (.125)	1.6 (.062)	0.25 (.010)
3/16	4.8 (.187)	2.4 (.093)	0.25 (.010)
1/4	6.4 (.250)	3.2 (.125)	0.30 (.012)
3/8	9.5 (.375)	4.8 (.187)	0.30 (.012)
1/2	12.7 (.500)	6.4 (.250)	0.30 (.012)
3/4	19.1 (.750)	9.5 (.375)	0.43 (.017)
1	25.4 (1.00)	12.7 (.500)	0.48 (.019)

Used for immersion resistant shield termination, and coaxial cable termination of wires rated for at least +125°C.
QPL Listed
Spec: M83519/1 (MIL-S-83519)
Temperature Rating: -55°C to +150°C

			Cable OD
	Raychem P/N	Sumitomo P/N	Jacket OD Max.	Shield OD Min.
M83519/1-1	S01-01-R, 665143-000	S01-01-S	1.95mm (0.075 in)	0.9mm (0.035 in)
M83519/1-2	S01-02-R, 642145-000	S01-02-S	2.7mm (0.105 in)	1.4mm (0.055 in)
M83519/1-3	S01-03-R, 775210-000	S01-03-S	4.3mm (0.170 in)	2.15mm (0.085 in)
M83519/1-4	S01-04-R, 346656-000	S01-04-S	6.0mm (0.235 in)	3.3mm (0.130 in)
M83519/1-5	S01-05-R, 118577-000	S01-05-S	7.0mm (0.275 in)	4.3mm (0.170 in)

Used for immersion resistant shield termination, and coaxial cable termination of wires rated for at least +125°C.
QPL Listed
Spec: M83519/2 (MIL-S-83519)
Temperature Rating: -55°C to +150°C
Preinstalled Lead: 150mm (6") SPEC 55A0111, MIL-W-22759/32-22 wire

			Cable OD
	Raychem P/N	Sumitomo P/N	Jacket OD Max.	Shield OD Min.
M83519/2-6	S02-06-R, 704613-000	S02-06-S	1.95mm (0.075 in)	0.9mm (0.035 in)
M83519/2-7	S02-07-R, 163665-000	S02-07-S	2.7mm (0.105 in)	1.4mm (0.055 in)
M83519/2-8	S02-08-R, 866259-000	S02-08-S	4.3mm (0.170 in)	2.15mm (0.085 in)
M83519/2-9	S02-09-R, 169750-000	S02-09-S	6.0mm (0.235 in)	3.3mm (0.130 in)
M83519/2-10	S02-10-R, 669507-000	S02-10-S	7.0mm (0.275 in)	4.3mm (0.170 in)