All Items

• Ratcheting design ensures consistent quality crimps
• Adjustable crimp pressure
• Thumbscrews to interchange dies
• Size: 8.7"

• Accepts any of the hundreds of different PEW 12 system crimp dies and locators (p/n's that start with 624...)
• Parallel jaw operation
• Excellent leverage transfer
• Good handling through ergonomic center of gravity
• Length: 200mm/7.9in

• Compatible with all crimp dies, locators, wire stops, etc. for the PEW 12 hand crimp tool.
• Sub 3-sec cycle time
• Illuminated work area
• Dependable, reliable, low-maintenance
• Uses Milwaukee M12 Li-Ion batteries
• Supplied in plastic case: 500 x 420 x 125mm (19.7 x 16.5 x 5in)
• 2 year warranty
• 25,000 cycle service interval. Tool tracks cycles and displays remaining cycle block until service needed.

• Wide crimp range of .50-3.0 mm² (20-12 AWG)
• Adjustable height locator.
• Full cycle ratchet insures a complete and perfect crimp each and every time.
• Cushioned grips. 9.9" size.

• Identical to the standard PEW 12 crimp frame, but designed to open 4mm larger. Helpful when crimping larger terminals.
• Accepts any of the hundreds of different PEW 12 system crimp dies and locators (p/n's that start with 624 and 625)
• Parallel jaw operation
• Excellent leverage transfer
• Good handling through ergonomic center of gravity
• Length: 200mm/7.9in

• Angled head design
• Ratcheting design ensures consistent quality crimps
• Adjustable crimp pressure
• Thumbscrews to interchange dies
• Size: 9.3"

For use with a wide variety of open barrel crimp terminals.

For use with Delphi open barrel crimp terminals including:
- MP150-series, Metri-Pack 150 Rear Insert type, Delphi
- GT150.35- and GT150.45-series, GT-150 Sealed, Delphi
- MP150.2-series, Metri-Pack 150.2 Pull to seat, Delphi
- MP150P-series, Metri-Pack 150 Pull to seat, Delphi
- MP150U-series, Metri-Pack 150 Unsealed, Delphi
- MP280, Metri-Pack 280, Delphi
- WP-series, Weather-Pack, Delphi

• Economical crimper delivers the same type of crimp the more expensive MIL-Spec tools provide.
• Built-in locator assures accurate positioning of the pin and socket.
• Full cycle ratchet insures a complete and perfect crimp each and every time.
• Cushioned grips. Compact 6.5" size.

Features 11 "F" crimp cavities from 1.4-3.7mm (1.4, 1.7L, 1.7H, 2.0L, 2.0H, 2.4L, 2.4M, 2.4H, 2.8, 3.2, 3.7mm)
L=Narrow crimp width, M=Mid size crimp width, H=Wide crimp width (Widest, of the particular size available)
3 round insulation crimps: 1.8, 2.5, and 4.0mm diameter
Made in Japan

• For use on solid barrel type (screw machine) contacts used in RS232 style connectors.
• Adjustable pin height locator.
• Full cycle ratchet insures a complete and perfect crimp each and every time.
• Cushioned grips. Compact 6.5" size.

• Accepts any of the hundreds of different PEW 12 system crimp dies and locators*
• User friendly rotatable die position
• Stroke from 6 to 14mm (0.24 - 0.55")
• Automatic safety closure - needed only for 14mm (0.55") stroke
• Digital crimp counter
• Hand or foot switch
• Adjustable leg height
• Operating pressure: 6 BAR (87 PSI)
• Height: 500mm (20") Width: 280mm (11") Depth: 325mm (13")
• Weight: 34kg (74 lbs)

• Crimping machine with sliding tray for most of the crimp dies and locators of the Rennsteig PEW 12 Crimp System*
• Stroke of 14mm (0.55")
• Wire clamps in for safe working
• Machine crimps automatically following insertion
• Automatic release following insertion
• Digital crimp counter
• Operating pressure: 6 BAR (87 PSI)
• Height: 500mm (20") Width: 280mm (11") Depth: 325mm (13")
• Weight: 34kg (74 lbs)

• Mini-bevel cutting edge
• 1.0mm/18 AWG copper cutting capacity
• Length: 115mm/4.5in

• Flush cutting edge
• 1.3mm/16 AWG copper cutting capacity
• Length: 130mm/5.1in

• Flush cutting edge
• 0.8mm/20 AWG copper cutting capacity
• Length: 120mm/4.7in