Check Out

Wire Strippers

NEW ITEM! TOOL-CS402
Ringer Shielded Cable Stripper
OEM P/N: 45-402

NEW ITEM! TOOL-CS402 Ringer Shielded Cable Stripper

OEM P/N: 45-402

The IDEAL® Ringer™ Cable Stripper delivers precision stripping for most non-round shielded cable and other outer cable jackets, including M27500 cable. This tool is designed to make your work easier, more accurate, and more efficient.

For 8-10 Mil insulation thickness, including Kynar, Tefzel, Teflon
For cable from .012" to .22" diameter
V-notch jaw automatically positions and holds cable, increasing cutting accuracy
Wire guide roller maintains stripping head alignment, producing a square, clean cut
Fixed blades are sized to insulation, and stainless steel construction assures long life
K-6493 blade, with .152mm (.0060") cutting depth

NOTE: Length-wise cutting by use of front blade slot, requires additional blade, sold separately.

Series Catalog (IDEAL-Ringer-CAT.pdf)

TOOL-WS-
Manual Wire Stripper

TOOL-WS- Manual Wire Stripper

Low cost wire stripper with ground knife-type notches for light-duty stripping
Plier nose
Cutting edge cuts copper up to 16 AWG
Self opening spring design with safety lock
Length: 165mm/6.5in

	AWG Range
	30	28	26	24	22	20	18	16	14	12	10	8	Mfg. P/N:
WS-01	●	●	●	●	●	●							CP-301G
WS-02						●	●	●	●	●	●		CP-302G

NOTE: Not for use on MIL-spec wiring.

TOOL-WS-
Stripmaster Wire Stripper

TOOL-WS- Stripmaster Wire Stripper

For automotive wire types, and MIL-W-22759/16 and /17 (Not for use on aircraft)
Precision-ground, knife-type blades provide clean, accurate stripping
One-step stripping enhances productivity
Length: 180mm/7.1in

	AWG Range
	30	28	26	24	22	20	18	16	14	12	10	8	Mfg. P/N:
WS-11	●	●	●	●	●	●							45-098
WS-12			●	●	●	●	●	●					45-097
WS-13					●	●	●	●	●	●	●		45-092
WS-14							●	●			●	●	45-099

NOTE: Sizes 12-8 awg do not work on MIL-spec wiring. Not compatible with MIL-W-22759/32 type, which require the Custom Stripmaster model.

Series Catalog (Stripmaster-CAT.pdf)

TOOL-WS-1X-STOP
Adjustable Stop for Stripmaster Wire Stripper
OEM P/N: L-5270

TOOL-WS-1X-STOP Adjustable Stop for Stripmaster Wire Stripper

OEM P/N: L-5270

For Stripmaster and Custom Stripmaster wire stripper

Series Catalog (Stripmaster-CAT.pdf)

NEW ITEM! TOOL-WS-3x
Custom Stripmaster Wire Stripper

NEW ITEM! TOOL-WS-3x Custom Stripmaster Wire Stripper

For Mil-Spec wire types: M22759/16/17, /32/33/34/35, /41/42/43/44/45/46, M81044/11/12/13
For Spec 44: 44A011X, 44M9976
For Spec 55: 55A011X, 55D011X, 55A021X, 55D021X, 55A081X, 55PC011X, 55PC021X
Precision counter-bored die blades provide clean, accurate stripping, without contacting the conductor
Grit type gripper pad
One-step stripping enhances productivity
Length: 180mm/7.1in

	AWG Range
	30	28	26	24	22	20	18	16	14	12	10	8	Mfg. P/N:
WS-31			●	●	●	●	●	●					45-1987
WS-32									●	●	●		45-1611

Series Catalog (MilSpecStripmaster-CAT.pdf)

MultiStrip® 16 Automatic Self-adjusting Insulation Stripper

TOOL-WS16
MultiStrip® 16 Automatic Self-adjusting Insulation Stripper
OEM P/N: 707 040 RT

TOOL-WS16 MultiStrip® 16 Automatic Self-adjusting Insulation Stripper

OEM P/N: 707 040 RT

Applicable for fine, flexible and solid cables
Stripping Capacity: 0.08 - 16 mm² (28 - 6 AWG)
Semi-circular grooved holding clamp for better grip that holds practically any insulation material securely in place.
For special requirements, such as particularly hard or soft insulation materials, optimum fine adjustments can be made using the adjustment wheel.
Adjustable length stop for precision work. Up to 18mm (11/16")
Built-in wire cutter

TOOL-WS16-Cassette
MultiStrip® 16 Replacement Blade Cassette
OEM P/N: 707 041 RT

TOOL-WS16-Cassette MultiStrip® 16 Replacement Blade Cassette
Kit Contents: Replaceable blade cassette

OEM P/N: 707 041 RT

Privacy Notice | Terms and Conditions | Site Map