Crimping - General/Universal

An economical crimper with 5 cavities to crimp open barrel terminals from 24-14 AWG. Parallel jaw action helps prevent the rolling tendency of ratcheting type crimpers, but require greater hand force to operate, so these are recommended only for occasional use. 8.4" length.
Comparable to Delphi 12085271 and SPX Kent-Moore J-38125-7 crimpers

For use with a wide variety of open barrel crimp terminals.

NOT compatible with:
- BC35, BC40-series bullet connectors
- QLW-series, Furukawa
- ESJ-series, Tyco/AMP Econoseal MkII J-series
- MP150-series, Metri-Pack 150 Rear Insert type, Delphi
- MX23A-series, JAE
- MX47-series, JAE
- JWPF-series, JST
- SS10-series, Tyco/AMP Superseal 1.0
- WP-series, Weather-Pack, Delphi

An economical crimper for Delphi GT, Metri-Pack, and Weather-Pack terminals from 22-14 AWG. Parallel jaw action helps prevent the rolling tendency of ratcheting type crimpers, but require greater hand force to operate, so these are recommended only for occasional use. 8.4" length.

For use with Delphi open barrel crimp terminals including:
- MP150-series, Metri-Pack 150 Rear Insert type, Delphi
- GT150.35- and GT150.45-series, GT-150 Sealed, Delphi
- MP150.2-series, Metri-Pack 150.2 Pull to seat, Delphi
- MP150P-series, Metri-Pack 150 Pull to seat, Delphi
- MP150U-series, Metri-Pack 150 Unsealed, Delphi
- MP280, Metri-Pack 280, Delphi
- WP-series, Weather-Pack, Delphi

Crimps Deutsch size 20 and 16 closed barrel (screw machine) 20-14 AWG terminals.

• Economical crimper delivers the same type of crimp the more expensive MIL-Spec tools provide.
• Built-in locator assures accurate positioning of the pin and socket.
• Full cycle ratchet insures a complete and perfect crimp each and every time.
• Cushioned grips. Compact 6.5" size.

NOTE: For size 20 contacts the locator needs to be removed and the contact manually positioned.

Molex brand "F" type crimper, for Molex .093", .062", Mini-Fit, KK, SL, etc., that is well suited for a wide range of other terminal types as well, for 24-14 AWG wire.
Features 13 "F" crimp cavities from 1.4-4.8mm (1.4, 1.6, 1.8, 2.0, 2.3, 2.5, 2.8, 3.2, 3.4, 3.6, 3.9, 4.3, 4.8mm)
Molex P/N: 63811-1000

Compatible with:
- BC35, BC40-series bullet connectors
- Crimp splices FCS-1 and FCS-2

NOT compatible with:
- GT150.35- and GT150.45-series, GT-150 Sealed, Delphi
- HX040.JC-series, Sumitomo
- MP150-series, Metri-Pack 150 Rear Insert type, Delphi
- MP150U-series, Metri-Pack 150 Unsealed, Delphi
- MP280, Metri-Pack 280, Delphi
- MX23A-series, JAE
- MX47-series, JAE
- QLW-series, Furukawa
- SS10-series, Tyco/AMP Superseal 1.0
- WP-series, Weather-Pack, Delphi

Ideal for crimping small terminals, the Hozan P-706 is machined and built to high standards that result in a high quality crimp.

Features 11 "F" crimp cavities from 1.4-3.7mm (1.4, 1.7L, 1.7H, 2.0L, 2.0H, 2.4L, 2.4M, 2.4H, 2.8, 3.2, 3.7mm)
L=Narrow crimp width, M=Mid size crimp width, H=Wide crimp width (Widest, of the particular size available)
3 round insulation crimps: 1.8, 2.5, and 4.0mm diameter
Made in Japan

NOT compatible with:
- YESC.15, 1.5mm System Sealed, Yazaki
- GT150.35, GT-150 Sealed, Delphi
- DS, HD, HM, MT 090 Unsealed, Sumitomo
- MP150-series, Metri-Pack 150 Rear Insert type, Delphi
- MP150.2-series, Metri-Pack 150.2 Pull to seat, Delphi
- MP150P-series, Metri-Pack 150 Pull to seat, Delphi
- MP150U-series, Metri-Pack 150 Unsealed, Delphi
- MX23A-series, JAE
- MX34-series, JAE
- MX47-series, JAE
- SSC-series, Tyco/AMP Sealed Sensor Connector
- TS025-series, Sumitomo
- W025-series, Sumitomo

The Hozan P-707 features 13 "F" crimp cavities suitable for a wide range of terminals, both small and large.
Die range: 1.2-4.2mm (1.2, 1.4, 1.4L, 1.7, 1.7L, 2.0, 2.0L, 2.4, 2.4L, 2.9, 2.9L, 3.5, 4.2mm)
L=Narrow crimp width
2 round insulation crimps: 1.6, and 2.2mm diameter
Made in Japan

NOT compatible with:
- 58X-series, Yazaki
- MX150-series, Molex
- SSC-series, Tyco/AMP Sealed Sensor Connector

Crimps Deutsch size 16 and 12 closed barrel (screw machine) 20-12 AWG terminals.

• For use on solid barrel type (screw machine) contacts used in RS232 style connectors.
• Adjustable pin height locator.
• Full cycle ratchet insures a complete and perfect crimp each and every time.
• Cushioned grips. Compact 6.5" size.

NOTE: For size 12 contacts the locator needs to be removed and the contact manually positioned.