250FN-PIN1 for .3-.85 mm² (22-18 AWG) wire, p/n: 42475-3, brass
250FN-PIN2 for .85-2.0 mm² (18-14 AWG) wire, p/n: 42474-3, brass
250FN-PIN3 for 2.0-3.0 mm² (14-12 AWG) wire, p/n: 61281-3, tin plated brass

250FN-SKT1 for .3-.85 mm² (22-18 AWG) wire, p/n: 42640-1, brass
250FN-SKT2 for .85-2.0 mm² (18-14 AWG) wire, p/n: 41202, brass
250FN-SKT3 for 2.0-5.0 mm² (14-10 AWG) wire, p/n: 41449, brass

Used for splash resistant shield termination, and coaxial cable termination of wires rated for at least +85°C.
Preinstalled 22 AWG ground lead 6" long.
Operating Temperature: -55°C to +125°C

For "One-step" termination of a wire to the lead of a electrical component or terminal of a connector.
Operating Temperature: -55°C to +125°C

For crimped, environmentally sealed, wire to wire splicing.
Protects splices from fuel, oil, water, salt, and corrosion.
Operating Temperature: -55°C to +125°C

NOTE: This is a seal plug only. The hole pictured does not go all the way through.

NOTE: The Econoseal J Series MK II and SSC (Sealed Sensor Connector) series use the same plug.

ESJ-PIN1 for .2-.5 mm² (24-20 AWG) wire, Tyco/AMP p/n: 171631-1 strip (173600-1 loose, alt gold p/n: 171631-2)
ESJ-PIN2 for .5-1.25 mm² (20-16 AWG) wire, Tyco/AMP p/n: 171661-1 strip (173706-1 loose, alt gold p/n: 171661-2)

NOTE: The Sealed Sensor Connector series use the same pin terminals

ESJ-SKT1 for .2-.5 mm² (24-20 AWG) wire, Tyco/AMP p/n: 171630-1 strip (171699-1 loose, alt gold p/n: 171630-5)
ESJ-SKT2 for .5-1.25 mm² (20-16 AWG) wire, Tyco/AMP p/n: 171662-1 strip (173707-1 loose, alt phos. bronze p/n: 171662-4, alt gold p/n: 171662-5)

Previously item: TM-SL
Tyco/AMP Econoseal J Series Mk II
ESJ-SL1 for insulation dia. 1.4-2.4 mm (.055-.094 in), Tyco/ AMP p/n: 172746-1, black
ESJ-SL2 for insulation dia. 2.0-2.6 mm (.079-.102 in), Tyco/ AMP p/n: 172888-2, gray

A high performance 2:1 shrink ratio, flame retardant, chemical and abrasion resistant tubing. The first choice in protecting high performance wiring harnesses.
Spec: MIL-DTL-23053/16
Operating Temperature: -75°C to +150°C
Min. Shrink Temperature: 150°C

A very clear, thin-wall, flexible 2:1 shrink ratio tubing. Used to protect wire and cable labels, and other items to protect them from mechanical and chemical abuse while permitting full inspect-ability of the item covered.
Spec: MIL-DTL-23053/18
Operating Temperature: -50°C to +150°C
Min. Shrink Temperature: 150°C

JPT-PIN1 for .2-.5 mm² (24-20 AWG) wire, Tyco/ AMP p/n: 1-965982-1 strip (1-965983-1 loose)
JPT-PIN2 for .5-1.0 mm² (20-18 AWG) wire, Tyco/ AMP p/n: 1-962915-1 strip (1-963748-1 loose)
JPT-PIN3 for 1.5-2.5 mm² (16-14 AWG) wire, Tyco/ AMP p/n: 1-962916-1 strip (1-963749-1 loose)

Receptacle Contacts with Single Wire Sealing System (Length 21.0 mm)

JPT-SKT1 for .35-.5 mm² (22-20 AWG) wire, Tyco/ AMP p/n: 929941-3 strip (929942-3 loose)
JPT-SKT2 for .5-1.0 mm² (20-18 AWG) wire, Tyco/ AMP p/n: 929939-3 strip (929940-3 loose)
JPT-SKT3 for 1.5-2.5 mm² (16-14 AWG) wire, Tyco/ AMP p/n: 929937-3 strip (929938-3 loose)

JPT-SL1 for insulation dia. 1.2-2.1 mm (.047-.083 in), Tyco/ AMP p/n: 828904-1, blue
JPT-SL2 for insulation dia. 2.2-3.0 mm (.086-.118 in), Tyco/ AMP p/n: 828905-1, white

Receptacle Contacts with Modified Spring and Single Wire Sealing System (Length 19.6 mm)

JPT2-SKT1 for .2-.5 mm² (24-20 AWG) wire, Tyco/ AMP p/n: 964282-2 strip (964281-2 loose)
JPT2-SKT2 for .5-1.0 mm² (20-18 AWG) wire, Tyco/ AMP p/n: 964286-2 strip (964285-2 loose)
JPT2-SKT3 for 1.5-2.5 mm² (16-14 AWG) wire, Tyco/ AMP p/n: 964273-2 strip (964287-2 loose)

Used for immersion resistant shield termination, and coaxial cable termination of wires rated for at least +125°C.
Spec: M83519/1 (MIL-S-83519)
Operating Temperature: -55°C to +150°C

P/N: Green, 2822344-1 (Supercedes p/n: 917319-4)
Natural, 2822344-2
Black, 2822344-3
Gray, 2822344-4
Yellow, 2822344-5

P/N: Green, 2822343-1 (Supercedes p/n: 917318-4)
Natural, 2822343-2
Black, 2822343-3
Gray, 2822343-4
Yellow, 2822343-5

Plug for sealing unused connector cavities

For .3-.5 mm² (22-20 AWG) wire

For .3-.5 mm² (22-20 AWG) wire

While this isn't a hybrid connector itself, it is part of the hybrid series
Mating half of connector: 174915, 175446, 175448, 175521, 177609, 178093, 178764, 178780, 5174915, 5175446, 5175448, 5177609, 5178093, 5178764, 5178780

Mating half of connector: 174915, 175444, 175521, 177609, 178764, 178780, 179375, 5174915, 5175444, 5177609, 5178764, 5178780, 5179375