All Items

• Ratcheting design ensures consistent quality crimps
• Adjustable crimp pressure
• Thumbscrews to interchange dies
• Size: 8.7"

• Accepts any of the hundreds of different PEW 12 system crimp dies and locators (p/n's that start with 624...)
• Parallel jaw operation
• Excellent leverage transfer
• Good handling through ergonomic center of gravity
• Length: 200mm/7.9in

• Compatible with all crimp dies, locators, wire stops, etc. for the PEW 12 hand crimp tool.
• Illuminated work area
• Dependable, reliable, low-maintenance
• Uses Milwaukee M12 Li-Ion batteries
• Supplied in plastic case: 500 x 420 x 125mm (19.7 x 16.5 x 5in)
• 2 year warranty

• Identical to the standard PEW 12 crimp frame, but designed to open 4mm larger. Helpful when crimping larger terminals.
• Accepts any of the hundreds of different PEW 12 system crimp dies and locators (p/n's that start with 624 and 625)
• Parallel jaw operation
• Excellent leverage transfer
• Good handling through ergonomic center of gravity
• Length: 200mm/7.9in

• Angled head design
• Ratcheting design ensures consistent quality crimps
• Adjustable crimp pressure
• Thumbscrews to interchange dies
• Size: 9.3"

For use with a wide variety of open barrel crimp terminals.

NOT compatible with:
- BC35, BC40-series bullet connectors
- QLW-series, Furukawa
- ESJ-series, Tyco/AMP Econoseal MkII J-series
- MP150-series, Metri-Pack 150 Rear Insert type, Delphi
- MX23A-series, JAE
- MX47-series, JAE
- JWPF-series, JST
- SS10-series, Tyco/AMP Superseal 1.0
- WP-series, Weather-Pack, Delphi

For use with Delphi open barrel crimp terminals including:
- MP150-series, Metri-Pack 150 Rear Insert type, Delphi
- GT150.35- and GT150.45-series, GT-150 Sealed, Delphi
- MP150.2-series, Metri-Pack 150.2 Pull to seat, Delphi
- MP150P-series, Metri-Pack 150 Pull to seat, Delphi
- MP150U-series, Metri-Pack 150 Unsealed, Delphi
- MP280, Metri-Pack 280, Delphi
- WP-series, Weather-Pack, Delphi

• Economical crimper delivers the same type of crimp the more expensive MIL-Spec tools provide.
• Built-in locator assures accurate positioning of the pin and socket.
• Full cycle ratchet insures a complete and perfect crimp each and every time.
• Cushioned grips. Compact 6.5" size.

Compatible with:
- BC35, BC40-series bullet connectors
- Crimp splices FCS-1 and FCS-2

NOT compatible with:
- GT150.35- and GT150.45-series, GT-150 Sealed, Delphi
- HX040.JC-series, Sumitomo
- MP150-series, Metri-Pack 150 Rear Insert type, Delphi
- MP150U-series, Metri-Pack 150 Unsealed, Delphi
- MP280, Metri-Pack 280, Delphi
- MX23A-series, JAE
- MX47-series, JAE
- QLW-series, Furukawa
- SS10-series, Tyco/AMP Superseal 1.0
- WP-series, Weather-Pack, Delphi

Features 11 "F" crimp cavities from 1.4-3.7mm (1.4, 1.7L, 1.7H, 2.0L, 2.0H, 2.4L, 2.4M, 2.4H, 2.8, 3.2, 3.7mm)
L=Narrow crimp width, M=Mid size crimp width, H=Wide crimp width (Widest, of the particular size available)
3 round insulation crimps: 1.8, 2.5, and 4.0mm diameter
Made in Japan

NOT compatible with:
- YESC.15, 1.5mm System Sealed, Yazaki
- GT150.35, GT-150 Sealed, Delphi
- DS, HD, HM, MT 090 Unsealed, Sumitomo
- MP150-series, Metri-Pack 150 Rear Insert type, Delphi
- MP150.2-series, Metri-Pack 150.2 Pull to seat, Delphi
- MP150P-series, Metri-Pack 150 Pull to seat, Delphi
- MP150U-series, Metri-Pack 150 Unsealed, Delphi
- MX23A-series, JAE
- MX34-series, JAE
- MX47-series, JAE
- SSC-series, Tyco/AMP Sealed Sensor Connector
- TS025-series, Sumitomo
- W025-series, Sumitomo

NOT compatible with:
- 58X-series, Yazaki
- MX150-series, Molex
- SSC-series, Tyco/AMP Sealed Sensor Connector

• For use on solid barrel type (screw machine) contacts used in RS232 style connectors.
• Adjustable pin height locator.
• Full cycle ratchet insures a complete and perfect crimp each and every time.
• Cushioned grips. Compact 6.5" size.

• Mini-bevel cutting edge
• 1.0mm/18 AWG copper cutting capacity
• Length: 115mm/4.5in

• Flush cutting edge
• 1.3mm/16 AWG copper cutting capacity
• Length: 130mm/5.1in

• Flush cutting edge
• 0.8mm/20 AWG copper cutting capacity
• Length: 120mm/4.7in

• Flush cutting edge
• 2.0mm/12 AWG copper cutting capacity
• Length: 125mm/4.9in

• GT 150
• GT 280
• 150 Metri-Pack
• 280 Metri-Pack
• 280 Tangless & 280 Bus Bar
• 630 Pull-To-Seat
• 800 Metri-Pack Female

• 56 Series
• 280 Metri-Pack
• 480 Metri-Pack
• 630 Metri-Pack
• 800 Metri-Pack Male Tangless

Delphi P/N: 12014012-1

Delphi P/N: 12031876-1

• Flat, serrated jaws
• Mini-bevel cutting edge
• 1.0mm/18 AWG copper cutting capacity
• Length: 120mm/4.7in

• Half-round, serrated jaws
• Mini-bevel cutting edge
• 1.0mm/18 AWG copper cutting capacity
• Length: 135mm/5.3in

• Half-round, serrated jaws
• Length: 135mm/5.3in

• Flat, serrated jaws
• Length: 138mm/5.4in

• Half-round, smooth jaws
• Length: 150mm/5.9in

• Light weight, ergonomic design
• Simple operation, ease-of-use
• Simple adjustment features to accommodate varying terminal heights, depths and carrier strip lengths
• Adjustable tool accommodates side-feed front-carrier terminal strips of varying sizes. Tool is not designed to cut end-feed, center-carrier or dual-carrier terminal strips

• Tool to separate terminals from terminal-reel, coil up to a material thickness of 1/32"
• The Cut Off Tool enables operators to easily cut side-feed, front-carrier terminal strips and reels
• Produces a clean cut of multiple terminals at once – for more efficiency
• Versatile tool, works with most standard metal strip reels

• Low cost wire stripper with ground knife-type notches for light-duty stripping
• Plier nose
• Cutting edge cuts copper up to 16 AWG
• Self opening spring design with safety lock
• Length: 165mm/6.5in

• For automotive wire types, and MIL-W-22759/16 and /17 (Not for use on aircraft)
• Precision-ground, knife-type blades provide clean, accurate stripping
• One-step stripping enhances productivity
• Length: 180mm/7.1in

• Applicable for fine, flexible and solid cables
• Stripping Capacity: 0.08 - 16 mm² (28 - 6 AWG)
• Semi-circular grooved holding clamp for better grip that holds practically any insulation material securely in place.
• For special requirements, such as particularly hard or soft insulation materials, optimum fine adjustments can be made using the adjustment wheel.
• Adjustable length stop for precision work. Up to 18mm (11/16")
• Built-in wire cutter